Configuring Flow Exports on H3C MSR 36-20 Routers
For NetFlow analysis, you need to configure your devices to export flows to Site24x7 On-Premise Poller, which is the NetFlow collector. The On-Premise Poller will be listening to the particular port to receive flows. Learn how to find the port number of your On-Premise Poller.
Configure flows (Netstream) on H3C MSR 36-20 routers devices using the following commands:
system-view
ip netstream export host (ip address) 9996
ip netstream export source interface (ip address)
ip netstream timeout active 1
ip netstream timeout inactive 15
ip netstream export version 9 origin-as
ip netstream export version 9 bgp-nexthop
ip netstream mpls label-positions
ip netstream export host (ip address) 9996
ip netstream export source interface (ip address)
ip netstream timeout active 1
ip netstream timeout inactive 15
ip netstream export version 9 origin-as
ip netstream export version 9 bgp-nexthop
ip netstream mpls label-positions
Execute the below command in all interfaces of the device:
ip netstream inbound
Refer to H3C's official documentation for configuring flows on other H3C devices.